bolted joint การใช้

• In bolted joints, most of the embedment occurs during torquing.
• Bolts in a bolted joint often have an important function as a dowel, resisting shear forces.
• When working with a bolted joint, the strength comes from friction between the materials bolted together.
• For this reason, bolted joints should always be designed with careful consideration for the grip length.
• These applications typically use a drive shaft and bolted joint to transmit power to a secondary implement or accessory.
• Any electrical connector, bolted joint, and jigsaw puzzle is an example of assembling based on mating connection.
• A Screw joint is sometimes considered as a separate type but it is actually a variation of bolted joint.
• "' Bolted joints "'are one of the most common elements in construction and machine design.
• This reduces the spring rate of the bolted joint which allows it to maintain more force under the same vibration levels.
• However, during construction, to save labor and material costs, builders Bethlehem Steel were approved to use bolted joints to save money.
• The brinell marks will often appear in evenly spaced patterns along the bearing preload in bolted joints when a hardened washer is not used.
• High-quality bolted joints require hardened steel washers to prevent the loss of pre-load due to Brinelling after the torque is applied.
• The second type of bolted joint transfers the applied load in shear of the bolt shank and relies on the shear strength of the bolt.
• For the next three months, construction crews working at night welded 2 " steel plates over each of the skyscraper's 200 bolted joints.
• Jam nuts, other types of locknuts, lock washers, and thread-locking fluid are ways to prevent vibration from loosening a bolted joint.
• Also, a new rule was enforced : " never trust a bolted joint any longer than is necessary to put a riveted one in place ".
• It is a span structure consisting of a cast-iron trough supported by a single arch with five ribs, each consisting of four sections with bolted joints.
• For two bolted joints of identical design and installation, except the second having a longer grip length, the first joint will be more likely to loosen and fail.
• Before welding techniques and bolted joints were developed, metal framed buildings and structures such as the Eiffel Tower, Shukhov Tower and the Sydney Harbour Bridge were generally held together by riveting.
• For example, these sensors have been used in the manufacturing of automobiles ( brakes, clutches, door seals, gasket ), battery lamination, bolted joints, fuel cells etc.